Spring Valley, N.Y., Code of Ordinances ch. 147 (eCode360 ed. 2026) § 147-41

Installation, clearance, control of equipment installed near combustible materials

In Force
Verified 11/9/2026 · Next check 2/7/2027
Spring ValleySpecific Conditions

Operative Text

Spring Valley, N.Y., Code of Ordinances ch. 147 (eCode360 ed. 2026) § 147-41
Where heat-producing equipment is installed on or adjacent to combustible materials, the location, insulation, clearance and the control of the equipment shall be such that the temperature on the surface of the combustible materials will not exceed a safe temperature.
Source: Legislative text reproduced verbatim
Plain English

Spring Valley Code of Ordinances ch. 147 § 147-41 establishes that any heat-producing equipment placed on or near combustible materials must be positioned, insulated, and controlled so that the surface temperature of those materials stays within a safe range. The rule focuses on the relationship between the equipment and its surroundings rather than the equipment itself in isolation. It applies broadly to any installation scenario where heat output could pose a risk to nearby combustible surfaces.

Written by anthropic/claude-sonnet-4.6 · Reviewed on November 9, 2026

Plain English — not legal advice.

For Property Managers

Under ch. 147 § 147-41, property operators who install or maintain heat-producing equipment are generally expected to evaluate clearance distances, insulation quality, and equipment controls whenever combustible materials are nearby. Compliant operators typically document installation specifications and verify that surface temperatures on adjacent combustible materials remain within accepted safe limits. Regular inspections of heating equipment and its surroundings help demonstrate ongoing compliance with this provision.

General guidance for property managers — not legal advice for your specific situation. Consult an attorney for advice on your case.

For Tenants

Section 147-41 of the Spring Valley Code of Ordinances gives tenants a basis to raise concerns if heat-producing equipment in their unit or building appears to be installed too close to combustible materials without adequate insulation or clearance. Tenants who observe such conditions may consider reporting them to the appropriate local code enforcement or building inspection authority. Tenant-rights organizations familiar with Spring Valley housing codes can help residents understand what documentation or steps are generally available when this type of concern arises.

General guidance for tenants — not legal advice for your specific situation. Consult a tenant-rights organization or attorney for advice on your case.

Generated November 9, 2026 — auto-generated, not yet human-reviewed. See /transparency for methodology.

Effective Timeline

Click on timeline segments to view historical versions.

References Out

No outbound references recorded yet for this provision.

References In

Rules and statutes that cite this regulation

Spring Valley Code § 147-9
Spring Valley Code § 147-11
Spring Valley Code § 147-9
Spring Valley Code § 147-12

Related Rules

§ 244.290
Dwelling plumbing facilities required
§ 244.300
Shared bath dwelling unit plumbing facilities required
§ 244.310
Basement water closet

Source Information

Snapshot SHA:
Fetched:Nov 9, 2026, 06:25 PM UTC