Sleepy Hollow, N.Y., Code of Ordinances ch. 245 (eCode360 ed. 2026) § 245-25

Interior finishes, trim and decorative materials

In Force
Verified 11/10/2026 · Next check 12/10/2026
Sleepy HollowHabitability & Repair

Operative Text

Sleepy Hollow, N.Y., Code of Ordinances ch. 245 (eCode360 ed. 2026) § 245-25
Interior finish materials for acoustical correction, surface insulation and decorative treatment on the surfaces of walls and ceilings, and interior trim shall be of materials that will not, in burning, give off excessive amounts of smoke or objectionable gases.
Source: Legislative text reproduced verbatim
Plain English

Section 245-25 of Sleepy Hollow's Code of Ordinances establishes a safety standard for interior finish materials used on walls and ceilings, including acoustical, insulating, and decorative treatments as well as trim. The rule requires that these materials, when they burn, must not produce excessive smoke or harmful gases. This is a fire and life-safety measure aimed at limiting hazardous conditions for building occupants in the event of a fire.

Written by anthropic/claude-sonnet-4.6 · Reviewed on November 9, 2026

Plain English — not legal advice.

For Property Managers

Under Chapter 245, Section 245-25 of the Sleepy Hollow Code of Ordinances, compliant property operators generally select and install interior wall and ceiling finishes—including acoustical panels, surface insulation, decorative coverings, and trim—that meet recognized smoke and toxic-gas emission standards. Operators typically retain product documentation, such as manufacturer specifications or test certifications, demonstrating that materials meet applicable combustion safety thresholds. Routine inspections and renovation projects are common occasions to verify that existing and new materials conform to this standard.

General guidance for property managers — not legal advice for your specific situation. Consult an attorney for advice on your case.

For Tenants

Section 245-25 of the Sleepy Hollow Code of Ordinances gives occupants an interest in knowing that interior wall and ceiling materials in their building are required to meet smoke and gas emission safety standards when burned. If a tenant has reason to believe that finish materials in their unit or common areas do not meet this standard—for example, following a renovation—they may consider contacting the local building or code enforcement office to raise the concern. Tenant-rights organizations familiar with local housing codes can also help residents understand what documentation or inspections may be available to them.

General guidance for tenants — not legal advice for your specific situation. Consult a tenant-rights organization or attorney for advice on your case.

Generated November 9, 2026 — auto-generated, not yet human-reviewed. See /transparency for methodology.

Effective Timeline

Click on timeline segments to view historical versions.

References Out

No outbound references recorded yet for this provision.

References In

Rules and statutes that cite this regulation

Sleepy Hollow Code § 245-152
Sleepy Hollow Code § 245-90
Sleepy Hollow Code § 245-92
Sleepy Hollow Code § 245-90
Sleepy Hollow Code § 245-93
Sleepy Hollow Code § 245-92
Sleepy Hollow Code § 245-5
Sleepy Hollow Code § 245-5
Sleepy Hollow Code § 245-174
Sleepy Hollow Code § 245-183
Sleepy Hollow Code § 245-182
Sleepy Hollow Code § 245-185

Related Rules

§ 244.260
Compliance required
§ 14.567
ADOPTED BY REFERENCE
§ 244.340
Sewer and water connections

Source Information

Snapshot SHA:
Fetched:Nov 9, 2026, 07:24 PM UTC