Oneida, N.Y., Code of Ordinances ch. 77 § 77-48
Electrical requirements
Operative Text
A. Electrical wiring and equipment shall be installed in conformity with the Electrical Code in force in the City and be maintained so as not to be a potential source of a ignition of combustible material or a potential source of electrical hazard. B. Electrical wiring and equipment shall be firmly secured to the surface on which it is mounted. C. Electrical wiring and equipment installed in damp or wet locations or where exposed to explosive or flammable gases or to excessive temperatures shall be of a type approved for the purpose and location. D. Electrical wiring and equipment shall be protected against excessive current by properly rated overcurrent devices. E. Electrical wiring and equipment shall be grounded or otherwise protected by insulation, isolation or guarding so as to minimize the danger of high voltages from lightning or other causes. F. Electrical equipment which in ordinary operation produces arcs, sparks or excessive heat shall be enclosed or separated and isolated from all combustible material. G. Service equipment and overcurrent protection devices shall be installed and maintained in a readily accessible location.
Section 77-48 of Oneida's Code of Ordinances (ch. 77) establishes baseline safety standards for electrical wiring and equipment in residential and other covered properties. The rule requires that all electrical systems conform to the city's Electrical Code, be properly secured, grounded, and protected against overcurrent, and be suited to their specific environment—including damp, wet, or high-temperature locations. Equipment that generates arcs, sparks, or excessive heat must be enclosed or isolated from combustible materials, and service panels and overcurrent devices must remain readily accessible at all times.
Plain English — not legal advice.
Property owners and managers operating under Oneida Code ch. 77 § 77-48 generally ensure that all electrical wiring and equipment is installed in accordance with the city's current Electrical Code and kept in ongoing compliance—not just at the time of installation. Compliant operators routinely verify that wiring is firmly secured, that overcurrent protection devices are properly rated and accessible, and that equipment in damp, wet, or high-temperature areas carries the appropriate approval rating for those conditions. Maintaining documentation of inspections and promptly addressing any identified electrical deficiencies are practices commonly associated with meeting the standards set out in § 77-48.
General guidance for property managers — not legal advice for your specific situation. Consult an attorney for advice on your case.
Tenants living in properties subject to Oneida Code ch. 77 § 77-48 have an interest in knowing that their landlord is obligated to maintain electrical systems in a safe, code-compliant condition—including proper grounding, secured wiring, and accessible service panels. If a tenant observes conditions that may violate § 77-48, such as exposed wiring, inaccessible electrical panels, or equipment that appears unsuitable for a damp location, they may consider reporting those conditions to the appropriate Oneida city code enforcement office. Tenant-rights organizations and legal aid resources can help tenants understand what documentation to gather and what general options may be available when electrical safety concerns arise.
General guidance for tenants — not legal advice for your specific situation. Consult a tenant-rights organization or attorney for advice on your case.
Generated November 7, 2026 — auto-generated, not yet human-reviewed. See /transparency for methodology.
Effective Timeline
References Out
No outbound references recorded yet for this provision.
References In
Rules and statutes that cite this regulation