Evans, N.Y., Code of Ordinances ch. 158 (eCode360 ed. 2026) § 158-40

Installation on or near combustible materials

In Force
Verified 11/9/2026 · Next check 12/9/2026
EvansSpecific Conditions

Operative Text

Evans, N.Y., Code of Ordinances ch. 158 (eCode360 ed. 2026) § 158-40
Where heat-producing equipment is installed on or adjacent to combustible materials, the location, insulation, clearance and the control of the equipment shall be such that the temperature on the surface of the combustible materials will not exceed a temperature of 175° F.
Source: Legislative text reproduced verbatim
Plain English

Evans, N.Y., Code of Ordinances ch. 158 § 158-40 establishes a maximum surface temperature limit for combustible materials located near heat-producing equipment. Specifically, the rule requires that the placement, insulation, clearance, and controls of any such equipment be configured so that the surface of nearby combustible materials never exceeds 175°F. The rule applies whenever heat-producing equipment is installed on or adjacent to combustible materials, regardless of the type of equipment involved.

Written by anthropic/claude-sonnet-4.6 · Reviewed on November 9, 2026

Plain English — not legal advice.

For Property Managers

Under Evans, N.Y., Code of Ordinances ch. 158 § 158-40, property owners and managers who install heat-producing equipment near combustible materials are generally expected to ensure that proper clearances, insulation, and equipment controls are in place. Compliant operators typically verify that the surface temperature of any adjacent combustible materials remains at or below 175°F under all operating conditions. Maintaining documentation of equipment specifications, installation details, and any inspections can help demonstrate ongoing compliance with this provision.

General guidance for property managers — not legal advice for your specific situation. Consult an attorney for advice on your case.

For Tenants

Evans, N.Y., Code of Ordinances ch. 158 § 158-40 establishes a right to housing where heat-producing equipment near combustible materials is installed and maintained so that those materials do not exceed 175°F. Tenants who observe signs of overheating, scorching, or improper equipment installation near combustible surfaces may have grounds to raise a concern with local code enforcement authorities in Evans, N.Y. Tenant-rights organizations and housing advocacy groups can help explain what options may be available when a potential violation of this provision is identified.

General guidance for tenants — not legal advice for your specific situation. Consult a tenant-rights organization or attorney for advice on your case.

Generated November 9, 2026 — auto-generated, not yet human-reviewed. See /transparency for methodology.

Effective Timeline

Click on timeline segments to view historical versions.

References Out

No outbound references recorded yet for this provision.

References In

Rules and statutes that cite this regulation

Evans Code § 158-35
Evans Code § 158-69
Evans Code § 158-66
Evans Code § 158-73
Evans Code § 158-66
Evans Code § 158-74
Evans Code § 158-66
Evans Code § 158-73
Evans Code § 158-75
Evans Code § 158-76
Evans Code § 158-70
Evans Code § 158-10
Evans Code § 158-80

Related Rules

§ 244.290
Dwelling plumbing facilities required
§ 244.300
Shared bath dwelling unit plumbing facilities required
§ 244.310
Basement water closet

Source Information

Snapshot SHA:
Fetched:Nov 9, 2026, 08:42 PM UTC