Cohoes, N.Y., Code of Ordinances ch. 215 § 215-29
Electrical requirements
Operative Text
A. General requirements. (1) Electrical wiring and equipment shall be installed in conformity with generally accepted standards and maintained so as not to be a potential source of electrical hazard. (2) Electrical wiring and equipment shall be firmly secured to the surface on which it is mounted. (3) Electrical wiring and equipment installed in damp or wet locations or where exposed to explosive or flammable gases or to excessive temperatures shall be of a type approved for the purpose and location. (4) Electrical wiring and equipment shall be protected against excessive current by properly rated overcurrent devices. (5) Electrical wiring and equipment shall be grounded or otherwise protected by insulation, isolation or guarding so as to minimize the danger of high voltages from lightning or other causes. (6) Electrical equipment which, in ordinary operation, produces arcs or sparks shall be enclosed, unless separated and isolated from all combustible material. (7) Service equipment and overcurrent protection devices shall be installed and maintained in a readily accessible location. B. Artificial lighting. Residential buildings and occupancies shall be wired electrically, and lighting equipment shall be installed throughout to provide adequate illumination for the intended use of each space. Electric wiring system shall be connected to an adequate source of supply.
Cohoes, N.Y., Code of Ordinances ch. 215 § 215-29 establishes baseline electrical safety standards for residential buildings. Wiring and equipment must be properly installed, secured, grounded, and protected against overcurrent, and must not pose a hazard from arcs, sparks, moisture, or extreme temperatures. Residential spaces must also be wired to provide adequate artificial lighting connected to a sufficient power source.
Plain English — not legal advice.
Under § 215-29, compliant property operators ensure that all electrical wiring and equipment is installed to accepted standards, firmly secured, and kept free of hazards throughout the life of the tenancy. Operators typically verify that overcurrent protection devices and service equipment are accessible, that wiring in damp or high-temperature areas uses approved materials, and that arc- or spark-producing equipment is properly enclosed or isolated. Routine inspections and prompt remediation of any electrical deficiencies are hallmarks of ongoing compliance with this provision.
General guidance for property managers — not legal advice for your specific situation. Consult an attorney for advice on your case.
Section 215-29 gives tenants a basis to expect that their residential unit's electrical systems are safe, properly grounded, protected against overcurrent, and capable of providing adequate lighting. If electrical wiring or equipment appears hazardous, unsecured, or inadequate, tenants may report the condition to the City of Cohoes code enforcement office, which has authority to inspect and require corrections. Tenant-rights organizations can also help residents understand how an unresolved electrical violation under this provision might be raised in housing or other proceedings.
General guidance for tenants — not legal advice for your specific situation. Consult a tenant-rights organization or attorney for advice on your case.
Generated November 7, 2026 — auto-generated, not yet human-reviewed. See /transparency for methodology.
Effective Timeline
References Out
No outbound references recorded yet for this provision.
References In
No inbound references recorded yet for this provision.